Manlift. Aerial work platform. 45XA. Man Lift. Transportable
Weighing in at only 4,715 lb (2,139 kg) operators can transport
the 45XA on a utility trailer attached to a medium-duty SUV or
truck. No commercial driver's license required.
Lightweight
Low point and floor loading is ideal for applications on lawns,
landscaping and sensitive flooring applications. Hydraulic
outriggers and automatic leveling capabilities allow users to set
up and begin using lift functions in under 30 seconds.
Self-Propelled
High performance 4WD system provides 3.5 mph (6 km/h) drive
speed and 48% gradeability. Dual power and a narrow machine
width makes the 45XA ideal for indoor and outdoor applications.
Manlift. Aerial work platform. 45XA. Man Lift.
• 51 ft (15.6 m) working height
• 27 ft (8.2 m) maximum outreach
• Dual Power (DC & Engine)
• Automatic leveling
• Platform jib & extension boom
• 48% Gradeability
Manlift. Aerial work platform. 45XA. Man Lift.
Automatic Leveling System
A self-leveling system provides quick and easy
set-up in less than 30 seconds.
Hydraulic Outriggers
Optimized outrigger geometry provides industry
leading leveling capability.
Working Envelope and Outreach
The articulating boom design features an
upper telescopic extension boom that can be
positioned at a negative angle and a platform jib
providing exceptional reach, working envelope,
and platform positioning capability. Easy to Use
Both the platform and ground control station
feature an easy-to-understand display panel
with control buttons that are logically positioned
around a single machine image.
Versatile
A removable platform and optional material
lifting system provides the ability to convert the
machine into a light duty crane. An integrated
4,500-watt continuous duty generator provides
AC power to the 40-amp battery charger and
upper and lower GFI outlets for power on the
go.
Manlift. Aerial work platform. 45XA. Man Lift. Power System
The drive system is powered by either four 6-
volt 245-amp/hr batteries or the gas engine and
the lift system is always powered by batteries
for convenient indoor and outdoor use.
BIL-JAX, Inc. provides coverage on all products for one (1) full year, and covers all specified major structural components for five (5) full years. Due to continuous product improvements, we reserve the right to make
specification and/or equipment changes without prior notification or obligation. Photographs and drawings contained herein are for illustrative purposes only. Refer to the appropriate Operator's Manual for instructions on
the proper use of this equipment. Failure to follow the appropriate Operator's Manual instruction or to otherwise act irresponsibly, may result in serious injury or death. This machine meets or exceeds applicable OSHA
Regulations, and complies with all ANSI standards as originally manufactured for intended applications. Market specific machine configurations meet or exceed applicable CSA standards.
Specifications for 45XA US Metric
Manlift. Aerial work platform. 45XA. Man Lift height
Working height ¹ 51 ft 15.6 m
Platform height ² 45 ft 13.7 m
Outreach
Maximum (from centerline) 27 ft 8.2 m
Maximum (from edge of footpad) 21 ft 6.4 m
Turntable rotation 700º non-continuous
Load capacity 500 lb 227 kg
Leveling capability 12 1/2º
Stowed dimensions
(A) Height 6ft 9 in 2.06 m
(B) Length 18 ft 3 in 5.56 m
(C) Width 5 ft 6 in 1.68 m
Platform dimensions
Height - railing 43 in 109 cm
Length 30 in 76 cm
Width 60 in 152 cm
Jib length 4 ft 3 in 1.3 m
Jib vertical motion 150º (+70 / -80)
Jib rotation (optional) 180º / hydraulic
Outrigger Footprint
Length (fully deployed) 12 ft 2 in 3.7 m
Width (fully deployed) 11 ft 3½ in 3.4 m
Footpad diameter 12½ in 32 cm
Outrigger type Hydraulic w/Auto Leveling
Power Source 24V DC and
21 HP Kawasaki Gas Engine
Batteries 4 x 6V 245 amp-hr
Maximum Speed
IC power 3.5 mph 5.6 km/h
DC power 1.75 mph 2.8 km/h
Gradability * 48%
Wheel Base 8 ft 8 in 2.7 m
Turning Radius
Inside 10 ft 3 m
Outside 17 ft 6 in 5.34 m
Brakes Spring Applied/Hydraulic Release
(Rear Wheels Only)
Tire Size 26 X 12 bar lug tires
Total Weight ³ 4,715 lb 2,139 kg
Standard Features
• 51 ft (15.7 m) maximum working height
• 27 ft (8.2 m) working outreach
• 500 lb (227 kg) lift capacity
• 3.5 mph (5.6 km/h) maximum drive speed
• 48% gradability
• Automatic leveling system
• 700-degree non-continuous turntable rotation
• Fully proportional control system
• 110V GFI outlet at platform and turntable
• Hour meter and battery condition indicators
• Air line to platform
• Water line to platform.
¹ The metric equivalent of working height adds 2 m to the maximum platform height.
U.S. adds 6 ft to the maximum platform height.
² Maximum platform height when outriggers are fully extended on a level surface.
³ Weight will vary depending on options and/or market destination; excludes transport trailer weight.
* Dependent on adequate traction.
Manlift. Aerial work platform. 45XA. Man Lift. Options
• Material lifting hook or forks
• Platform tool tray
• Hydraulic jib rotate
• Turf tires
• Non-marking tire (indoors)
• Foam filled tires.
